A hinge with nothing to come loose
Seven knuckles turn on a pin that is part of the case itself. No screws, no rivets, nothing to lose.
CARD HOLDERS · TOP LOADERS
Pocket Carry
Two top loaders. On your lanyard.
A slim case for the two cards you’re carrying today. Each half holds one card in a standard 3×4 top loader, face to face. Four magnets snap it shut, the hinge is built into the case, and a loop at each end clips onto a lanyard.
$25
Made to order in your colors · No payment at checkout · Shipping and timing confirmed before you commit
OPEN IT UP
Open the lid. Both cards on show.
The lid swings back on its hinge and lies flat, so both cards face up side by side, ready to show or trade. Close it and the magnets pull it shut.
Each card stays in its own top loader. Slide the loader out of its recess to hand it over; the cutouts at each end give your thumb a way in.
HOW IT WORKS
Built for the show floor. Small enough for a pocket.
Magnets in the corners
Four 8 × 2 mm disc magnets sit flush in the opening edge, two in each half. It snaps shut and stays shut in a pocket or a bag.
A loop at each end
Clip a lanyard, keyring or carabiner through either loop and wear it around the show. The lid still opens while it hangs.
Sized to the top loader
Each recess fits a standard 3×4 top loader with a quarter of a millimeter to spare all around, so it sits snug and doesn’t rattle.
YOUR COLORS
Your colors, body and trim.
The body and the trim (the stripe around the edge and the two bars inside the lid) each come in the color you choose. Three we like:
SEE IT MOVE
Open, show, snap it shut.
About twenty seconds, no sound: the case opens flat, closes on its magnets, hangs from a lanyard, and comes in three of our favorite color pairs.
Design renders made from the production files. Cards shown for scale, not included.
THE DETAILS
Built around two top loaders.
- Holds
- Two cards in standard 3×4 top loaders, one in each half, face to face
- Opens
- Flat, on a built-in hinge
- Closes with
- Four 8 × 2 mm magnets
- Carry
- A loop at each end of the opening edge, for a lanyard, keyring or clip
- Size, closed
- 3.9″ W × 4.6″ H × ½″ D; 5.4″ long over the loops
- Weight
- About 3.7 oz (105 g), empty
- Made
- To order, in your colors
$25 · No payment at checkout
Questions
Which top loaders fit?
Standard 3×4 rigid top loaders, the everyday kind for one regular card. Thinner loaders fit too, with a little play. Extra-thick loaders for patch or memorabilia cards are too deep; ask if you are not sure about yours.
How many cards does it hold?
Two: one top loader in each half, face to face. It is made for the cards you are showing or trading that day, not for a stack.
Can I pick the colors?
Yes. The body and the trim each come in one color. Tell us your combination when you request yours.
What does it cost?
$25 each, in any colors. Send a request with your colors; we confirm shipping and timing before you commit, and nothing is charged at checkout.
Are the cards or the lanyard included?
No. The case comes empty; the cards and lanyard in the pictures show the size and how it hangs.
Are these photos?
They are design renders made from the production files. Color and surface texture will vary a little with the material.