The whole card on show
Each frame has a 3.8 × 2.8 inch window. The bezel covers only the edge of the top loader, so nothing on the card is hidden.
New · Card holders
Splay
Eight top loaders. One fan.
$30
Made to order in your colors · No payment at checkout · Shipping and timing confirmed before you commit
OPEN IT UP
Open it as far as you like. It stays put.
Eight frames turn on one stainless bolt, each holding a card in a standard 3×4 top loader. Fold them into a stack for the shelf, or swing them out into a half circle on the table.
- Spread
- 180°
- Between frames
- 25.7°
- Footprint
- 11.4 × 7.4 in
HOW IT WORKS
Fanned out on the table. Folded flat on the shelf.
One stainless bolt
An M6 button-head bolt runs through the tab of every frame, with a washer each side and a nyloc nut. The nut sets how stiffly the fan swings.
Press in from the back
The pocket is open at the back. Six small ribs along its sides grip the top loader and guide it home. To swap a card, push the loader out through the window.
Folds to a 1½ inch stack
Close it and the eight frames lie flat against each other. Each one turns on a raised ring around the bolt, so the faces never rub.
THE DETAILS
Built around eight top loaders.
- Holds
- Eight cards in standard 3×4 top loaders, one in each frame
- Frame
- 5.9″ × 3.3″, 0.19″ thick (150 × 83.5 × 4.8 mm)
- Window
- 3.8″ × 2.8″, the whole card in view
- Folded
- A 1½″ stack
- Open
- Any angle up to 180°; fully open it stands on its own, 11.4″ × 7.4″
- Pivot
- M6 stainless button-head bolt, two washers, nyloc nut
- Made
- To order, in your color
$30 · No payment at checkout
Design renders made from the production files. Cards shown for scale, not included; card images © Wizards of the Coast.
Questions
Which top loaders fit?
Standard 3×4 rigid top loaders, the everyday kind for one regular card. Extra-thick loaders for patch or memorabilia cards are too deep; ask if you are not sure about yours.
Does it stay open?
Yes. The nyloc nut keeps a little friction on the bolt, so each frame stays where you leave it. Fully open, the first and last frames rest on their long edges and the fan stands on its own.
How do I change a card?
Push the top loader out through the window from the front; it comes out of the back. Press the new one into the back of the frame until it sits flat.
Can I pick the color?
Yes. Every Splay is made to order in the color you choose; tell us when you request yours. The pictures show navy.
What does it cost?
$30 each, in any color. Send a request with your color; we confirm shipping and timing before you commit, and nothing is charged at checkout.
Are the cards included?
No. The fan comes empty; the cards in the pictures show the size.
Are these photos?
They are design renders made from the production files. Color and surface texture will vary a little with the material.